Request Information

S2000

PUTTING INTO OPERATION

  • The unit can be used, opened and repaired by qualified technicians only.
  • It is forbidden to use the machine if flooded by liquids or in particularly aggressive or explosive/inflammable places.
  • Do not ignore the dangers for the operator’s health and follow the hygienic and safety regulations.
  • Check that the electrical wiring is carried out correctly according to the current regulations, and that the fuse blocks are closed and complete of fuses.
  • Check if all the cables, and the control and safety devices are intact.

USE

The superheaters S-1000 e S-2000 are designed to superheat water vapour or compressed air and require an external power, and steam / compressed air supply for their operation. Both units feature an ‘on’ switch and a thermostat for the temperature regulation from 100°C to 300°C.

  • It is possible to install the units at any point of the steam/compressed air outlet pipe, though it would be preferable to set them up next to the place of use.
  • Connect the steam/compressed air inlet to the female ¼ gas nipple situated on the side.
  • Connect the steam/compressed air outlet to the female ¼ gas nipple situated on the back.
  • Carry out the electrical wiring of the superheater, paying attention to the supply voltages.
  • Turn on the unit by means of the front switch. Once the boiler heating warning light turns off, the unit will be ready for use.
  • Use the specially provided pedal to operate the unit.

 

Contact form

For any information or request on our products and our activity, please contact us by filling out this form.

   

   

   

     

 


Submit


By clicking on "Submit" you automatically accept the Privacy Policy